KOMAL AGENCIES

(A SUPER MARKET FOR THE PLATING AND METAL FINISHING INDUSTRIES)
PLATING THICKNESS MEASURING INSTRUMENTS      LABORATORY TESTING INSTRUMENTS & EQUIPMENTS      ANODES      POLISHING COMPOSITION      POLISHING MOPS      PLATING ACCESSORIES      SAFETY WARE ITEMS      PLATING CHEMICALS     HEATERS      TEMPERATURE INDICATORS & CONTROLLERS      TITANIUM PRODUCTS      JIGS & RACKS      ULTRASONIC CLEANER      PRECISION RECTIFIER      SILICON RECTIFIER      PUMPS-CHEMICAL PROCESS CENTRIFUGAL PUMPS      AIR AGITATION UNIT - TURBINE BLOWER      WATER DEMINERALISER

 

WATER DEMINERALISER

 

MIXED-BED SYSTEMS (D Series) :
Mixed-bed demineralisers are as used where water of extremely high purity is needed. They have cation and anion exchanger resins mixed in a single column. This achieves higher purity standards, more neutral pH and greater silica and Co2 removal control than can be done with a two-bed system.

 

Operating pressure : 20-70 psi

 

Operating temperature : 1000C (max)

 

Electrical requirement for cond. meter : 230 Volts, 1 ph.

 

 

 

 

Also available point of use, manual, modular-designed and semiautomatic models in custom-built sizes.

 


Mixed bed system in PVC body

 

Models

Flow-rate
in Lit/hr

Output per regeneration
at 100 ppm as t.d.s.

D-4
D-5
D-6
D-8
D-10

75
250
600
1000
1500

700 litres
1500 litres
3500 litres
4500 litres
6000 litres

 

QUALITY OF TREATED WATER :

 pH
 Conductivity
 T.D.S.
 Silica

 6.5 to 7.0
 Less than 1 microsiemens/cm
 Less than 1 ppm
 Less than 0.02 ppm

 

THREE-BED SYSTEMS (KD Series):
This system consists of a two-bed system connected before a mixed-bed system, for specific requirements of greater quantity or higher quality of DM water.

 

Back

 

 

 

All details listed herein are for general guidance, subject to change and hence not a commitment.