The
use of vertical Tumbling Barrel or Horizontal
Polishing Barrel is for Mass Finishing of
small components which cannot be polished
individually. This is the most economical
means at low labour, to get absolute uniform
finish, The utility of Mass finishing are
Descaling, Deburring, Polishing, Scouring,
Burnishing, Radiusing and Cleaning.
|
|
OBLIQUE TUMBLING BARREL
Mass Finishing heavy-duty open ended Tumbling barrel is meant for
Mass Finishing operations. The octagonal M.S. barrel is on C.I./M.S.
fabricated frame coupled with stout tie bars and legs. The barrel is
either plain or rubber/PVC lined, rotatable by means of sector pinion
mechanism or discharge of processed parts, powered through direct or
V-belt driven geared motor 3 ph AC, in capacity.
|
|
TUB VIBRATORY FINISHING BARREL :
This basically involves a tub or 'U' shaped
duly rubberlined barrel to hold polishing
media (chips), either dry or water with
chemical compounds. The unit is mounted
on a sturdy frame. Powered by eccentric
motor of 3 hp, 440V spring mounted to impart
maximum vibration in output; supplied with
or without rectangular outer cover body
& noise-free lid.
|